Back to top
Send SMS    Call Me Free
Most Popular Products
Trust Stamp
Product Showcase

DIN Controller and Indicator

DIN Controller and Indicator

Product Details:

  • Product Type digital controller
  • Material Standard
  • Measuring Voltage Range 100 to 240 Volt (v)
  • Frequency (MHz) 50/60 Hz Hertz (HZ)
  • Protection System Standard
  • Size Standard
  • Warranty 1 Year
1 INR/Unit

Price And Quantity

  • 1 Unit
  • 1 INR/Unit

Product Specifications

  • 100 to 240 Volt (v)
  • 1 Year
  • 50/60 Hz Hertz (HZ)
  • Standard
  • Standard
  • Standard
  • digital controller

Trade Information

  • Telegraphic Transfer (T/T)
  • Standard
  • Asia
  • Gujarat

Product Description

  • Honeywell shall not be liable for any incidental damages, consequential damages, special damages, or any other damages, costs or expenses excepting only the cost or expense of repair or replacement as described above
  • Products must be installed and maintained in accordance with these instructions
  • There is no warranty against damage to the product
  • resulting from corrosion
  • Users are responsible for the suitability of the products to their application
  • For a valid warranty claim, the product must be returned carriage paid to the supplier within the warranty period
  • The product must be properly packaged to avoid damage from Electrostatic Discharge or other forms of harm during transit
  • These instruments are microprocessor based process controllers, indicators, and limit controllers
  • They can measure, display or control process variables such as temperature, pressure, flow and level from a variety of inputs
  • EEPROM technology protects against data or configuration loss during power outages
  • Inputs are user configurable for connection to thermocouple and RTD probes, as well aslinear process signal types such as mVDC, VDC or mADC
  • Output options include relays, SSR drivers, triacs or linear mV/voltage modules
  • These can be used for process control,alarms, or retransmission of the process variable or setpoint to external devices such as data recorders and PLC's
  • A Transmitter Power Supply option module can provide an unregulated
  • 24V DC (22mA) auxiliary output voltage for external signal transmitters
  • Alarm indication is standard on all instruments up to five alarms are possible on the indicators.
  • Alarms may be set as process high or low, deviation (active above or below controller setpoint), band (active both above and below setpoint), or control loop types
  • These alarms can be linked to any suitable output.
  • Controllers can be programmed for on-off, time proportioning, or current proportioning control implementations, depending on the output modules fitted, and feature manual or automatic tuning of the PID parameters
  • A secondary control output is available when additional output modules are fitted


* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.