Back to top
Send SMS    Call Me Free
+918045475874
Most Popular Products
Trust Stamp
Product Showcase

Oil Flow Meter

Oil Flow Meter

Product Details:

  • Product Type flow meter
  • Material Standard
  • Protection System Standard
  • Size Standard
  • Color Standard
  • Warranty 1 Year
1 INR/Unit
X

Price And Quantity

  • 1 Unit
  • 1 INR/Unit

Product Specifications

  • Standard
  • Standard
  • 1 Year
  • Standard
  • Standard
  • flow meter

Trade Information

  • Telegraphic Transfer (T/T)
  • Standard
  • Asia
  • Gujarat

Product Description

Oil Flow Meter

Oil meters with mechanical roller counter, and with DIN 2501 (As Standard) flanged connections.

American ANSI 150 and Japanese JIS 10-20K flange drillings are available at no extra cost, these are not added to the part number charts below because they have no factory defined part numbers, however for weights and dimensions, please use standard DIN 2501 listed

Specifications.

Fuel oil meters with flanged connection. Electronic counter with display of total volume, subtotal volume (can be reset) in m3, litres or US gallons. Flow rate per minute or hour and operation hours. Transmitter with 2 configurable signal outputs for volumetric pulses, flow rate (current or frequency) or limit switch VZF 'II' are the new models for 2017 which include temperature compensation for more accurate metering.Not approved for resale use

Suitable for Fuel Types:  Heating Fuel, Extra Light / Light / Medium / Heavy (DN20 or above)Kerosene Naphtha Diesel Petrol Lubricating Oils

Your Benefits:

Reliable monitoring and flexible control of the system without additional transducers Simplifying burner settings for optimum performance Simple commissioning, maintenance-free Space saving installation without requirement for straight inlet or outlet paths Easy to install without restriction either horizontally or vertically Maximum safety due to integral particle filter in meter inlet Meters for heavy fuel oil should have a nominal diameter of DN 20 or larger.

Important: All meters must be fitted with a pre-filter of 100 Microns, Maximum. Ingress of particles over 100 microns may lead to wear and or jamming of the Rotary Piston, and will not be covered by Warranty


SHINE CLUSTER INDUSTRIES

* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.